1/32 (54mm) Figures

1/32 (54mm) Figure - Prussian Motor Transport Corps Driver, 1915

1/32 (54mm) Figure - Prussian Motor Transport Corps Driver, 1915

Stückpreis: 18,60 EUR

The photos below are snapshots from the 3D program used to create the master figure and a colourized version of the original photo. It is not a bad attempt to get the original colours of uniform and equipment right. The leather jacket M1907 could be a little darker and the service dress underneath with more grey, but apart from that it gives much life to these characters.

Figure painted by Günther Sternberg, Germany

Figure – Prussian Motor Transport Corps Driver, 1915 – Pr. Kraftfahrer 1915

  • Scale / Maßstab: 1/32nd (54mm)
  • Approx. height of figure/ ca. Höhe Figur: 54mm
  • Material: Resin
  • Parts / Teile: 10
  • Infosheet / Infoblatt: English
  • Code / Artikel-Nr.: 38MTH
  • Weight / Gewicht: 50,00 g
  • Attention: Not a toy. Model kit or model making accessories – not suitable for children under 14 years of age. / Achtung: Kein Spielzeug. Modellbauzubehör – nicht für Kinder unter 14 Jahren geeignet

GPSR Data / Angaben

  • Manufacturer / Hersteller: Jon Smith Modellbau
  • Responsible Person / Verantwortliche Person
  • Address: Hannoverstr. 68, 29664 Walsrode, Germany
  • Contact / Kontakt: info@jonsmith-modellbau.com
  • Tel: +49 (0)5161 8255

Contents Figure / Inhalt Figur:

  • Head with Top Hat and Flying Goggles/ Kopf mit Zylinder und Fliegerbrille
  • 2nd Alternative Head with Field Cap M1908 with Flying Goggles / 2. Alternativ-Kopf  mit Feldmütze M1908 und Fliegerbrille
  • Upper Body / Oberkörper
  • 2nd Alternative Upper Body with Rat / 2. AlternativOberkörper mit Ratte
  • Right Arm with Hand and Cigar / Rechte Arm with Hand mit Zigarre
  • Left Arm with Hand / Rechte Arm with Hand
  • Right Leg with Boot / Rechte Bein mit Stiefel
  • Left Leg with Boot / Linke Bein mit Stiefel
  • Pistol 08 / Pistole 08
  • Figure Base / Figur-Sockel

The Shoulder Rat is an option.

It is also possible to add imitation glass lenses to the goggles after painting is completed. Here one could use Micro Kristal Klear, or similar products to produce a clear film within the outer resin rings. Alternatively, one can produce the glass lenses by using a clear plastic or similar. I used the Micro Kristal Klear on the spectacles for German Prisoner bust.

The original photos shows this flashlight reflecting the light, hence it appears very shiny. The few original items that I have seen show them to be semi-gloss green.  The lamp should fit without any adjustments on his chest and partly under the open leather jacket. Trial fitting would be advised, especially when coats of paint have been applied to the figure. One can ease fitting by removing the sharp bottom edge a little. Underneath the pull-ring one could remove some of the resin filling the gap between ring and tunic.  

The flashlight is cast directly onto the tunic with the smaller scale figures (1:35th and 1:32nd).

1/32 (54mm) French MG Gunner

1/32 (54mm) French Infantryman Chauchat MG Gunner, 62nd Regiment

Stückpreis: 18,60 EUR

Below are photos of the painted 1/16th version with kepi head by David Lane

The photos below are snapshots from the 3D program used to create the master figure

French Infantryman Chauchat MG Gunner, 62nd Regiment

  • Scale / Maßstab: 1/32nd (54mm)
  • Approx. height of figure / ca. Höhe der Figur: 54mm
  • Material: Resin
  • Parts / Teile: 15
  • Infosheet / Infoblatt: English
  • Code / Artikel-Nr.: 34MCG
  • Weight / Gewicht: 90,00 g
  • Attention: Not a toy. Model kit or model making accessories – not suitable for children under 14 years of age. / Achtung: Kein Spielzeug. Modellbauzubehör – nicht für Kinder unter 14 Jahren geeignet

GPSR Data / Angaben

  • Manufacturer / Hersteller: Jon Smith Modellbau
  • Responsible Person / Verantwortliche Person
  • Address: Hannoverstr. 68, 29664 Walsrode, Germany
  • Contact / Kontakt: info@jonsmith-modellbau.com
  • Tel: +49 (0)5161 8255

Contents / Inhalt:

  • Figure (3 parts) / Figur (3 Teile)
  • Head with Kepi / Kopf mit Käppi
  • Alternative Head (Adrian Helmet) / 2. Kopf (mit Adrianhelm)
  • 2 CSRG Frontal Magazine Pouches (1st type) / 2 Stck. CSRG Magazintaschen (Typ 1)
  • Ruby Pistol Pouch M1916 / Ruby Pistolentasche M1916
  • Common European Frog (Rana temporaria) on Stone / Grasfrosch auf Stein
  • Figure Base / Figur-Sockel
  • Chauchat Mle. 1915 MG / Chauchat Mle. 1915 MG
  • Bipod Legs / Zweibein
  • Spare Bipod Legs / Ersatzteile – Zweibein

Above are photos of the unpainted 1:16th figure with alternative head and Adian helmet. The Chauchat MG has been fitted with the magazine holding 9 rounds

1/32nd (54mm) Poilu 1918

1/32nd (54mm) French Infantryman, 318th Inf, Regt., Verdun, 1918

Stückpreis: 18,60 EUR

French Infantryman, 318th Inf, Regt., Verdun, 1918

  • Scale / Maßstab: 1/32nd (54mm)
  • Material: Resin, Model Plaster / Modell-Gips (synethetische, kunststoffveredelte Gießmasse)
  • Parts / Teile: 13
  • Infosheet / Infoblatt: English
  • Code / Artikel-Nr.: 19PO
  • Weight / Gewicht: 120,00 g
  • Attention: Not a toy. Model kit or model making accessories – not suitable for children under 14 years of age. / Achtung: Kein Spielzeug. Modellbauzubehör – nicht für Kinder unter 14 Jahren geeignet

GPSR Data / Angaben

  • Manufacturer / Hersteller: Jon Smith Modellbau
  • Responsible Person / Verantwortliche Person
  • Address: Hannoverstr. 68, 29664 Walsrode, Germany
  • Contact / Kontakt: info@jonsmith-modellbau.com
  • Tel: +49 (0)5161 8255

Contents / Inhalt:

  • Figure (3 parts) / Figur (3 Teile)
  • Alternative Head / 2. Kopf
  • 3 x Ammunition Pouches M1916 / Patronentaschen M1916
  • Gas Mask M2 / Gasmaskenbehälter M2
  • Haversack M1892 / Brotbeutel M1892
  • Canteen M1877 / Feldflasche M1877
  • Group Canteen Bouteillon / Gruppenkochgeschirr Bouteillon
  • Emblem
  • Figure Base (Model Plaster) / Sockel

1/32nd (54mm) Saxon Stormtrooper 1917

1/32nd (54mm) Stormtrooper, Saxon Divisional Assault Company, Western Front 1917

Stückpreis: 18,60 EUR

Stormtrooper, Saxon Divisional Assault Company, Western Front 1917

  • Scale / Maßstab: 1/32nd (54mm)
  • Material: Resin
  • Parts / Teile: 10
  • Infosheet / Infoblatt: English
  • Code / Artikel-Nr.: 24LS
  • Weight / Gewicht: 85,00 g
  • Attention: Not a toy. Model kit or model making accessories – not suitable for children under 14 years of age. / Achtung: Kein Spielzeug. Modellbauzubehör – nicht für Kinder unter 14 Jahren geeignet

GPSR Data / Angaben

  • Manufacturer / Hersteller: Jon Smith Modellbau
  • Responsible Person / Verantwortliche Person
  • Address: Hannoverstr. 68, 29664 Walsrode, Germany
  • Contact / Kontakt: info@jonsmith-modellbau.com
  • Tel: +49 (0)5161 8255

Contents / Inhalt:

  • Figure (2 parts) / (2 Teile)
  • 1st Head with Steel Helmet M.16 / 1. Kopf mit Stahlhelm M.16
  • Alternative Head with Field Cap / Alternativ-Kopf mit Feldmütze
  • Luger P08 / Pistole 08
  • Tent Cloth M1892 / Zeltbahn M1892
  • Gas Mask Bag / Segeltuchtasche für Gasmaske
  • Water Bottle M07 / Feldflasche M1907
  • Labe Water Bottle M15 / Labeflasche mit Trinkbecher M1915
  • Trench Knife / Grabendolch
  • M15 Stick Grenade / M15 Stielhandgranate
  • Figure Base / Figur-Sockel

Above is the new 3D head now supplied with this kit.

Above are photos of this figure painted by German figure painter Günter Sternberg. He has used one of the single spare German Steel Helmet heads (in this case SH44).

Above are photos from German figure painter Maks Hof of the Saxon Stormtrooper. He has used many other JSM spare parts and accessories for this figure incl. the 1/32nd scale Officer / NCO Field Cap Head, SRD Rum Jars and Covered German M16 Helmet.

Another set of photos from Maks Hof, this time showing a different version of the Saxon Stormtrooper, with again other JSM spares, incl. the M16 Steel Helmet with Armoured Plate and Gas Mask M17, Trench Rat in Steel Helmet and holding the French Group Canteen Bouteillon.

1/32nd (54mm) French Infantryman 1917

1/32nd (54mm) French Infantryman, 115th Inf, Regt., Chemin des Dames, 1917

Stückpreis: 18,60 EUR

Figure painted by Günther Sternberg, Germany

French Infantryman, 115th Inf, Regt., Chemin des Dames, 1917

  • Scale / Maßstab: 1/32nd (54mm)
  • Material: Resin, Model Plaster / Modell-Gips (synethetische, kunststoffveredelte Gießmasse)
  • Parts / Teile: 12
  • Infosheet / Infoblatt: English
  • Weight / Gewicht: 100,00 g
  • Code / Artikel-Nr.: 17FIAttention: Not a toy. Model kit or model making accessories – not suitable for children under 14 years of age. / Achtung: Kein Spielzeug. Modellbauzubehör – nicht für Kinder unter 14 Jahren geeignet

GPSR Data / Angaben

  • Manufacturer / Hersteller: Jon Smith Modellbau
  • Responsible Person / Verantwortliche Person
  • Address: Hannoverstr. 68, 29664 Walsrode, Germany
  • Contact / Kontakt: info@jonsmith-modellbau.com
  • Tel: +49 (0)5161 8255

Contents / Inhalt:

  • Figure (2 Parts) / Figur (2 Teile)
  • Alternative Head / Alternativ-Kopf
  • 3 x Ammunition Pouches M1916 / 3 Stck. Patronentaschen M1916
  • Gas Mask M2 / Gasmaske M2
  • Haversack M1892 / Brotbeutel M1892
  • Canteen M1877 and Cup / Feldflasche M1877 und Tasse
  • Lebel Rifle M1886/93 (Fusil d’ Infantrie, modele 1886 tranforme 1893) / Lebel Gewehr M1886/93
  • Emblem
  • Figure Base / Figur-Sockel

1/32nd (54mm) Prussian Uhlan 1914

1/32nd (54mm) Prussian Trooper, Kings Uhlan Regt. No. 13 (1. Hanoverian), Western Front, 1914

Stückpreis: 20,80 EUR

Prussian Trooper, Kings Uhlan Regt. No. 13 (1. Hanoverian), Western Front, 1914

  • Scale / Maßstab: 1/32nd (54mm)
  • Material: Resin, Model Plaster / Modell-Gips (synethetische, kunststoffveredelte Gießmasse)
  • Parts / Teile: 12
  • Infosheet / Infoblatt: English
  • Code / Artikel-Nr.: 18KU
  • Weight / Gewicht: 140,00 g
  • Attention: Not a toy. Model kit or model making accessories – not suitable for children under 14 years of age. / Achtung: Kein Spielzeug. Modellbauzubehör – nicht für Kinder unter 14 Jahren geeignet

GPSR Data / Angaben

  • Manufacturer / Hersteller: Jon Smith Modellbau
  • Responsible Person / Verantwortliche Person
  • Address: Hannoverstr. 68, 29664 Walsrode, Germany
  • Contact / Kontakt: info@jonsmith-modellbau.com
  • Tel: +49 (0)5161 8255

Contents / Inhalt:

  • Figure (6 parts) / Figur (6 Teile)
  • Alternative Head with Field Cap / Alternativ-Kopf mit Feldmütze M1910
  • Cavalry Pattern Sword M1889 / Kavallerie-Degen M1889
  • Emblem

Model Plaster / Modell-Gips:

  • Base / Sockel
  • Wall / Wand
  • Pillar / Säule

1/32nd (54mm) Saxon Jäger 1917

1/32nd (54mm) Sergeant, Saxon Jäger Battalion No.12, Freiburg, 1917

Stückpreis: 15,60 EUR

Sergeant, Saxon Jäger Battalion No.12, Freiburg, 1917

  • Scale / Maßstab: 1/32nd (54mm)
  • Material: Resin
  • Parts / Teile: 7
  • Infosheet / Infoblatt: English
  • Code /Artikel-Nr.: 16FSJ
  • Weight / Gewicht: 80,00 g
  • Attention: Not a toy. Model kit or model making accessories – not suitable for children under 14 years of age. / Achtung: Kein Spielzeug. Modellbauzubehör – nicht für Kinder unter 14 Jahren geeignet

GPSR Data / Angaben

  • Manufacturer / Hersteller: Jon Smith Modellbau
  • Responsible Person / Verantwortliche Person
  • Address: Hannoverstr. 68, 29664 Walsrode, Germany
  • Contact / Kontakt: info@jonsmith-modellbau.com
  • Tel: +49 (0)5161 8255

Contents / Inhalt:

  • Figure (4 Parts) / Figur (4 Teile)
  • Alternative Head / Alternativ-Kopf
  • Emblem
  • Figure Base / Figur-Sockel