Jon Smith

Jon Smith Modellbau did not appear overnight, but was a process of many years interest in the 1914 – 18 conflict, the people who took part and figure model making in general. It probably all started way back in the 70s when buying those Japanese plastic kits and then checking beforehand the sides of the box to see how many figures were with the model. To me, even in those early days the figures gave the model an understandable scale and I believe it is what people will look at first when confronted with a vehicle or building diorama, military or otherwise.

The obvious next steps were the simple figure kit conversions – swapping heads, arms and legs etc. Of course they would never always fit and gaps had to be filled / small alterations applied – the first stages of figure sculpting had begun.

It was only a matter of time before the first full scratch figures were attempted. There were never any commercial interests at this stage and it was probably more of a challenge than anything else.

The end of the 80s and a new large era of resin figures had been introduced to the model market, mainly from that particular Belgium model making firm Verlinden. I had in the meantime produced for myself a small series of 1:25th scale German Infantry 1944 – 45 in winter snow-suits, a British Observer from the Royal Observer Corps 1944 in the same size and a larger scale Prussian Guardsman, holding a child on his arm. The last two produced based on the original photos.

The response from friends, particularly with the Prussian Guardsman gave rise to the first small resin and white metal figure production, using 2 part silicon rubber casts. Of course the results were never as good as one hoped and it soon became apparent that to bring out a commercial figure a professional caster would have to be brought in.

JSM was born.

Why The Great War

It is really a combination of different reasons why I chose The Great War period to base the figures on. Firstly, there was not really much on the market in the 1:15th scale at the time and I believed the interest was certainly there. Secondly, in order to make the figures I needed to research, measure and photograph the original equipment, weapons and uniforms etc. This was and still is achieved mainly through museums and collectors, which are never more than a few hours drive away from home. From the two sources, the collector is by far the most helpful and knowledgeable and will talk for hours about their own subject. Naturally, some of this information is then passed on in the infosheets and painting instructions supplied with each model kit.

About the Scale

The first figure kits are in the large Super Scale of 1:15th or more commonly known as 120mm. More recently I have turned to the classical 1:32, or 54mm scale.

The scale of a figure is nothing more than the ratio to the original size of a person from a given period, or to be more precise – a measurable item; a rifle for example. A 1:15th figure is 15 x smaller than the person you are sculpting (or 120mm x 15). A 1:32nd scale figure is 32 x smaller and so on…When you measure a model figure one should do it from the top of the head to the bottom of the feet, without any form of headdress, or footwear. To give another example – building plans are scaled down to their traditional sizes i.e. 1:500th – 2mm is 1m, 1:200th – 5mm is 1m, 1:100th – 10mm is 1m, 1:50th – 20mm is 1m etc. and if printed out on an accurate plotter can actually be compared using a ruler.

It should always be remembered that people today are on average much taller than in bygone days and many a collector has tried squeezing into some of his best uniform pieces. Even going back the short time to the 1914-18 period people were a lot smaller.

The German Machine Gunner (21MXG) figure is intentionally below the average 120 mm standard size associated with this model scale and would be the equivalent to a man of 1.70 m height – quite normal for this nation and period of time (French troops were on average even smaller).

Jon Smith

Actually it is Jonathan Peter Smith and I was brought up in the county of Warwickshire in the Midlands, UK. Later, the family moved to Sussex and then on to Bath, in the southwest of England. It was whilst in Sussex that I joined the British Army as an infantryman. This virtually put an end to any model making and it was not until the mid-80s that I slowly picked up the reins again. Like many ex-servicemen I married a local girl and settled down here in Northern Germany.

An apprenticeship as a painter and decorator was followed some years later by trade training as a professional Industrial and Architectural Model-Maker in Hanover, Germany. A natural advancement to the professional model making was the upgrade training to a technical draughtsman CAD Specialist in building construction during 2001.

The Meister qualifications were completed shortly afterwards at the FBZ Trade College in Garbsen, near Hanover. I currently work full time as a Technical Officer in a Facilities Management firm here in Germany.

In recent years the business has expanded in both range of products and customers, with JSM kits being sent to all corners of the world. I always look forward to receiving mail from home or overseas and will attempt to answer any critic, comments, or suggestions within a few days. I am particularly pleased with the current interest from Japan and it seems that what started so long ago with the purchase of those first Japanese kits has now turned a complete cycle.

Today I live with my family in the small town of Walsrode on the edge of the Luneburg Heath, in Northern Germany.